External Size:
4m (13'2") wide x 8m (26'3") deep + 1.1m (3'6") canopy (approx), 2 Rooms
Internal Size:
Room 1: 3.8m (12'6") wide x 3.8m (12'6") deep, Room 2: 3.8m (12'6") wide x 3.8m (12'6") deep (approx).

With its two spacious rooms, the Rhine 4 Grande is perfect for a wide variety of uses. Use one half as a summerhouse to relax and the other as a place to workout in your own private gym. Three opening windows let in lots of natural light and fresh air, and double doors give easy access. The internal double door will need to be cut into the dividing wall of the log cabin, enabling you to place it where best suits your needs.

Convenience Features:

• approx. 2000mm (6’6”) High internal eaves, giving more interior space. This is the lowest point inside so you’re unlikely to hit your head on the ceiling unless you’re taller than 6’6”.
• 2 Rooms
• Double Door, this gives ease of access to the Cabin when moving items into and out of it and also allows more fresh air into the cabin during summer months if desired.
• 3 opening windows.
• Internal double door, to be cut into dividing wall to where best suits your requirements. 1100mm (3’6”) (approx) overhanging canopy to the front of the cabin, creates a shady place ideal for relaxing outside on a sunny day, which also offers some protection from rain. The canopy can be cut back during construction quite easily if a smaller overhang is desired.

Construction Features:

• 28mm Thick tongue and grooved interlocking log walls featuring bevelled notches for ease of assembly and a better seal when compared to straight cut notches.
• 19mm Thick tongue and grooved roofing and flooring for a sturdier roof and to prevent bounce in the floor when walking upon it.
• Large 70mm x 70mm Pressure treated floor bearers to prevent fungal decay and damage by insects. The bearers sit underneath the whole of the cabin so that everything in contact with the foundation is pressure treated, unlike some other suppliers cabins.
• Heavy duty 140mm x 45mm (approx) Roof beams to prevent ‘sagging’, pre-notched to slot onto apexes
• All wood is planed, pre-cut (with the exception of trims), pre-notched pine or spruce to ensure a rapid and easy assembly.
• Windows are pre-hung and pre-assembled to simply slot into place.
• Double doors are provided as 6 assembled pieces that slot together then slot into place

Optional Features:

• Veranda, measuring 1.5m deep, gives an ideal seating area to the front of the cabin. Consists of two banisters and pressure treated flooring and bearers.
• Single window, can be placed in any of the walls except the front.
• Double door, can be placed in any of the walls except the front (Please note that when the door is placed at the side of the cabin it has to be assembled with the door opening inwards, otherwise it catches on the edge of the roof)

Note: The Log Cabin will be delivered on a flat bed van and you will need to unload it by hand, the driver will assist with this. The cabin is made from kiln dried timber and must be covered if it is to be stored outside prior to construction and treatment. This is to prevent moisture/rain from warping and rotting the timber, unless you plan to store the cabin inside, you will need tarpaulins or similar to provide cover for the wood.

Note: Roofing Shingles are available at extra cost.