External Size: 9m (26'3") wide x 3m (9'10") deep + 1m (3'3") canopy (approx), 2 Rooms
Internal Size: Room 1: L-Shaped; 4.6m (15'1") wide x 2.6m (8'6") deep (wide end); 1.6m (5'3") deep (narrow end)
Room 2: 3.6m (11'10") wide x 2.6m (8'6") deep (approx).

The Tamar 45 Grande is a large two roomed log cabin. The second room can be positioned on either side of the log cabin, so that you can easily construct a building to best cater for your needs. It is a very sturdy structure constructed from 45mm walls and its great design gives you a canopy over the double doors resulting in a canopy that uses less floor space and maximises room. Double doors at the front, five single windows, and an internal double door that separates the two rooms come as standard.

Please Note: Door can be placed on either left or right side of cabin. Positioning doors on the left requires a simple re-notch of the eave beam. Also in whichever configuration the cabin is assembled a notch "blanking" will be required (Not supplied). The internal door will need to be cut into the dividing wall, allowing you to position it wherever best suits your needs.

When constructing the cabin with its front doors in the middle, the internal doors will be cut into the dividing wall where the side window would usually be fitted. This window can then be cut into in any of the other walls of the log cabin as desired.

Convenience Features:

• Internal Eaves - approx. 2040mm (6’7”) high, giving more interior space. (This is the lowest point inside).
• Double Door - Giving ease of access when moving items in and out of the Log Cabin, also allows more fresh air into the cabin if desired.
• Five Windows – lets in plenty of fresh air and natural light.
• Overhanging Canopy - 1000mm (3’3”) (approx.), over double doors, offers some protection from rain.
• 2 Rooms
• Internal double door – To be cut into dividing wall to where best suits your requirements.

Construction Features:

• Walls - 45mm thick double tongue and grooved walls with bevelled notches for ease of assembly and a better seal compared to straight cut notches.
• Floor - 19mm thick tongue and grooved flooring to prevent bounce in the floor when walking upon it.
• Roof - 19mm thick tongue and grooved roof timbers to create a sturdier roof.
• Floor Bearers - Large 70mm x 70mm pressure treated floor bearers to prevent decay and damage by insects.
• Roof Beams - 140mm x 45mm, pre-notched to slot onto apexes.
• Pre-assembled, pre-notched apexes for front and back walls.
• Top wall section for side walls is cut to the angle of the roof to aid the nailing down of the roof boards.
• Storm Protection Beams - To secure the apex sections to the lower sections of the wall.
• All wood is planed, pre-cut (with the exception of trims), and pre-notched to ensure rapid and easy assembly.
• Windows are pre-hung and pre-assembled ready to slot into place.
• Double doors are provided as 6 assembled pieces that slot together then slot into place.

Please Note: The Log Cabin will be delivered on a flat bed van and you will need to unload it by hand, the driver will assist with this. To prevent moisture/rain from warping and rotting the timber, the Log Cabin must be covered if it is to be stored outside prior to construction and treatment.

Note: Roofing Shingles are available at extra cost.