Approx. External Size: 5m (16'5") wide x 4m (13'2") deep (approx) + 1.1m (3’6”) canopy (approx)

The Severn 4 45 Vantage+ is an extremely versatile and attractive log cabin with floor and roof insulation, double glazing, 2 flower boxes, window and door shutters for added privacy, and a unique bay window. Its generous sizing and 45mm walls make the Severn 4 45 Vantage+ log cabin perfect for a wide variety of different uses. Build your own home gym, personal garden office or games room. Add the optional veranda to create a great area outside your log cabin for some outdoor dining.

Convenience Features:

• approx. 2010mm (6’6”) High internal eaves, giving plenty of interior space. This is the lowest point inside
• Double Door with shutters, this gives ease of access to the Cabin when moving items into and out of it and also allows more fresh air into the cabin during summer months if desired. The shutters add privacy.
• Two front windows with shutters for added privacy.
• A unique and attractive bay window on the side of the cabin.
• 2 Decorative Flower Boxes under the front windows.
• 1100mm (3’6”) (approx) overhanging canopy to the front of the cabin, creates a shady place ideal for relaxing outside on a sunny day, which also offers some protection from rain. The canopy can be cut back during construction quite easily if a smaller overhang is desired.
• 14mm double glazed units for windows and doors. (Onsite glazing will be required)
• 25mm foil backed polyurethane floor insulation, goes underneath the cabin floor boards.
• Roof insulation made with 50mm polyurethane, that goes on top of the roof boards to create an over all roof thickness of approximately 87mm.

Construction Features:

• 45mm Thick tongue and grooved interlocking log walls featuring bevelled notches for ease of assembly and a better seal when compared to straight cut notches.
• 19mm Thick tongue and grooved roofing and flooring for a sturdier roof and to prevent bounce in the floor when walking upon it.
• Large 70mm x 70mm Pressure treated floor bearers to prevent fungal decay and damage by insects. The bearers sit underneath the whole of the cabin so that everything in contact with the foundation is pressure treated, unlike some other suppliers cabins.
• Heavy duty 140mm x 45mm (approx) Roof beams to prevent ‘sagging’, pre-notched to slot onto apexes
• All wood is planed, pre-cut (with the exception of trims), pre-notched pine or spruce to ensure a rapid and easy assembly.
• Windows are pre-hung and pre-assembled to simply slot into place.
• Double doors are provided as 6 assembled pieces that slot together then slot into place.

Optional Features:

• Veranda, measuring 1.5m deep, gives an ideal seating area to the front of the cabin. Consists of two banisters and pressure treated flooring and bearers.
• Single window, can be placed in any of the walls except the front.
• Double door, can be placed in any of the walls except the front (Please note that when the door is placed at the side of the cabin it has to be assembled with the door opening inwards, otherwise it catches on the edge of the roof) .

Note: The Log Cabin will be delivered on a flat bed van and you will need to unload it by hand, the driver will assist with this. The cabin is made from kiln dried timber and must be covered if it is to be stored outside prior to construction and treatment. This is to prevent moisture/rain from warping and rotting the timber, unless you plan to store the cabin inside, you will need tarpaulins or similar to provide cover for the wood.

Note: Roofing Shingles are available at extra cost.