External Size: 4m (13’2”) wide x 5.53m (18’2”) deep
Internal Size: 3.77m (12’4”) wide x 5.3m (17’4”) deep

ALL SIZES ARE NOMINAL

 

We have measured to ensure that even a "Mitsubishi Shogun" will fit into our Trent Garage as indicated above

The MKII version of the Trent Garage/Workshop is very spacious, measuring approximately 4m wide x 5.53m deep.  Its 45mm thick walls and 19mm roof timbers make it a strong and sturdy structure.  The wide solid double doors open to approximately 2235m wide x 1955mm high, giving plenty of room to fit a car through.  The Trent has two windows making it a light and airy building, and a single side door for easy access.

The Trent is perfectly designed for use as a garage and is supplied without a floor to create a level surface when driving a car into it. Garages are useful additions to a house, giving extra outdoor storage space or providing a safe and secure place to park the car.  A timber garage is both attractive and useful.

An optional floor is available to allow the Trent to be used for other purposes, making it an ideal workshop, studio, games room, club house, sauna, or gym.  

Features of the Trent Garage / Trent Workshop 45mm Tongue and Grooved interlocking log walls.

• 2235mm wide x 1955mm high Solid Double Doors at front, and Single Side Door.
• 2 Windows on side of building.
• 19 mm Optional Floor boards with extra bearers to construct a floor. (Note: The bearer across the doorway will need to be cut away after construction if the Trent is to be used as a garage for your car).
• 19 mm attractive tongue and groove Roof boards.
• High internal Eaves height of approx. 2250mm (as a Garage) or approx. 2160mm (as a Workshop). (Approx)
• Internal Ridge height of 2830mm (as a Garage) or 2750mm (as a Workshop). (Approx)
• Pressure treated bearers.
• All components are pre cut ready for easy assembly, all wood is planed and notched.  All screws and nails needed are provided.
• Detailed assembly instructions supplied.

Note: The Trent will be delivered on a flat bed van and you will need to unload it by hand, the driver will assist with this. This unit is made from kiln dried timber and must be covered if it is to be stored outside prior to construction and treatment. This is to prevent moisture/rain from warping and rotting the timber, unless you plan to store the unit inside, you will need tarpaulins or similar to provide cover for the wood.

Note: Roofing Shingles are available at extra cost.