Approx. External Size: 5m (16'5") wide x 3m (9'10") deep + 1.1m (3'6") canopy (approx)

The SunLight 3 Log Cabin makes a fantastic summerhouse with its attractive appearance and featured decorative apex window. A total of four windows let plenty of natural light and fresh air into the cabin whilst the two roof lights provide extra ventilation if required and come with integrated flyscreens.

Convenience Features:

• approx. 2010mm (6'6") High internal eaves, giving more interior space. This is the lowest point inside so you're unlikely to hit your head on the ceiling unless you're taller than 6'6".
• Double Door, this gives ease of access to the Cabin when moving items into and out of it and also allows more fresh air into the cabin during summer months if desired.
• Four opening windows - The side windows can be positioned where you want along the walls and will need to be cut in.
• Decorative Apex Window - can be fitted in any of the log cabin walls
• 1100mm (3'6") (approx) overhanging canopy to the front of the cabin, creates a shady place ideal for relaxing outside on a sunny day, which also offers some protection from rain. The canopy can be cut back during construction quite easily if a smaller overhang is desired.
• 2 Roof Lights with integrated flyscreens - For added light and ventilation. Will need to be cut into the log cabin roof in your desired position, allowing you to place them wherever best suits your requirements.

Construction Features:

• 28mm Thick tongue and grooved interlocking log walls featuring bevelled notches for ease of assembly and a better seal when compared to straight cut notches
• 19mm Thick tongue and grooved roofing and flooring for a sturdier roof and to prevent bounce in the floor when walking upon it.
• Large 70mm x 70mm Pressure treated floor bearers to prevent fungal decay and damage by insects. The bearers sit underneath the whole of the cabin so that everything in contact with the foundation is pressure treated, unlike some other suppliers cabins.
• Heavy duty 140mm x 45mm (approx) Roof beams to prevent 'sagging', pre-notched to slot onto apexes
• All wood is planed, pre-cut (with the exception of trims), pre-notched pine or spruce to ensure a rapid and easy assembly.
• Windows and single doors are pre-hung and pre-assembled to simply slot into place.
• Double doors are provided as 6 assembled pieces that slot together then slot into place

Note: The Log Cabin will be delivered on a flat bed van and you will need to unload it by hand, the driver will assist with this. The cabin is made from kiln dried timber and must be covered if it is to be stored outside prior to construction and treatment. This is to prevent moisture/rain from warping and rotting the timber, unless you plan to store the cabin inside, you will need tarpaulins or similar to provide cover for the wood.

Note: Roofing Shingles are available at extra cost.